Following the government announcement regarding lockdown restrictions, we wanted to take the opportunity to reassure our customers that we are very much still here to support you in every way possible!
We do not anticipate any disruption to our usual service
Crack Attaack is ready mixed all purposefiller that resists shrinking and is suitable for inside and outside repairs. crack attack gives super smooth finish and only needs light sanding before painting.This all purpose ready mixed filler is ideal for most building materials and is available from 151 in a cartridge and flexi. Directions for use : Ensure surface are dry, clean and free from dust and loose materials. Remove all decayed wood.allow damp wood to dry complrtely. rub down gloss surfaces. Unscrew the full nozzle and cut off the tip of the cartridge, leaving the threads intact. refit the nozzleand unscrew the nozzle cap. cut the tip of the nozzle at an angle of 45 degree to give the required diameter of filler. fit the cartridge into a cartridge gun. squeeze the trigger until it holds the cartridge firmly. apply filler by sqeezing the trigger.for tyhe best results apply in layers no more than 6mm over surface, pressing the next.smooth off filler immediately using wet blade. leave to dry- this can take from 12-48 hours depending on ambient conditions. protect from moisture duringsetting period.sand lightly before painting. always paint over the filler if used externally.after use, replace cap immidiately ans securely.wash tools immediately in warm water. Warning : Protect from frost.Do notuse creck attack in wet or damp conditions. prime metals before filling. do not use to glaze complete windows. do not use on surface that are regularly under water. This product contains a fungicide and may cause irrition to sensitive skin. keep out of the reach of children and animals. Avoid contact with eyes. wash hands after use. In case of contactwith eyes flush with plenty of cold water for 15 minutes. If swallowed, drink milk or water to dilute. seek medical advice if irritation persist. Avoid breathing dust from sanding. warning